Jingfeida foam casing water vending machine equipment is carefully designed based on the use environment of existing automatic water vending machines, especially for users and places with high environmental protection requirements, limited space, large water consumption, and high water quality requirements. Launched this series of foam-based water vending machines made of environmentally friendly materials.

The company attaches great importance to product quality. The accessories used are all well-known domestic accessories suppliers. They are carefully debugged and matched to ensure that the products are stable, reliable, and durable. Each machine is required to be high-quality when leaving the factory, so that customers can use it with confidence. Worry free and satisfied.

Equipment Advantages

1. Super large water production capacity: independent dual hosts, large-capacity square stainless steel water tank, water production capacity 1000G/2000G/30000G/4000G optional

2. Foam integrated casing: New all-polyester amine foam material foam body, environmentally friendly and safer.

3. Long filter life: RO reverse osmosis depth filtration, suitable for brackish water, long filter life.

4. Does not freeze at minus 40 degrees Celsius: Environmentally friendly thickened foam integrated material, locks in temperature, saves water and electricity, and is cold and frost resistant.

Body size:1100*900*2000mm

Water sales method: coin, credit card, scan QR code to pay

Card recharging methods: remote recharging in the mobile phone background, body recharging, recharging machine recharging

Installation environment: -40°C to 45"C

Body material: 1.2mm snowflake galvanized plate, optional all stainless steel material

Water inlet material: all 304 stainless steel

Insulation device: 20mm thermal insulation cotton bathroom heater lamps can be installed with carbon crystal plates

Built-in water tank: water tank capacity 240L sterile PE material

Filtration level: Level 6 to Level 13 physical filtering

Desalination rate: ≥99%

Sterilization system: ozone sterilization + ultraviolet sterilization device

Outlet water quality: purified water & weak alkaline water & mineral water & chlorine-rich water

Water production power: 60W/120W/150W/300W/450W

Temperature control system: 500W

Water production capacity: 400G/800G/1000G/2000G/3000G

System motherboard: 4G IoT motherboard

Wastewater ratio: 1: 1 (water-saving good water 3 wastewater 1 optional)

water saving module

The company has always attached great importance to water-saving in water purifiers. It has studied how water purifiers can save water without damaging the service life of RO membranes, and has now launched the fourth-generation water-saving system. By intelligently optimizing the operating time of the RO membrane, we do not forcefully change the operating mode of the RO membrane. The quality of the effluent water remains the same as before and will not be affected in any way.

First of all, our large water production RO membrane is rolled with imported anti-pollution membranes. Secondly, according to the characteristics of the membrane, we specially customized an intelligent water production system for RO membranes to achieve good water 3 wastewater 1 while allowing The RO membrane has reached its normal service life.

Water saving module one

Water production volume: 130 liters/hour (25°C)

Filtered water volume: ≥300 tons

Good water to waste water ratio: good water 2 waste water 1 (25°C)

Desalination rate: ≥99%

Water saving module 2

Water production volume: 260 liters/hour (25°C)

Filtered water volume: ≥600 tons

Good water to waste water ratio: good water 3 waste water 1 (25°C)

Desalination rate: ≥99%